Waterproof board waterproof plastic sheet provided by the manufacturer issues require special attention: laying waterproof board what particular areas of concern: water board has seepage, isolation characteristics, laying in water, pay attention to the following points: precise pre-construction Loft, pop standard line test shop minimize joints. Geotextile vault marked midline, midline and dome waterproof board unanimously midline, from the vault to the two arch, side wall symmetrical laying. The water board is fixed on a plastic heat sealing gaskets, welding firm, whole waterproof board without a perforation. Lay method using no nails melt, hot-melt method waterproof plate affixed to the plastic padded round pads, so that no mechanical damage water board. After the laying of geotextile, in order to prevent short side walls of reinforced waterproof plate aside cause damage, use a plastic sleeve or plastic sheeting to trap the steel head, then before laying waterproof board. Waterproof Plate to an appropriate degree, so that it can be fully integrated with the non-woven fabric and close to the shotcrete surface to prevent too tight or too loose, damaged or squeezed waterproof plate form artificial water points between water board every lap Every modification should, construction joints staggered 0.5 meters or more. Note that after the above points, you also need to carefully observe their environment laid, to learn to be flexible, nothing is standard, according to the actual situation to be. Waterproof composite board price consulting, waterproof pvc board wholesale where to look, went to the Laiwu City of geotextile material Ltd. it, you can call the hotline counseling for details!